Differential Gear Oil - Yamaha GRIZZLY Ultramatic YFM660FP Owner's Manual

EBU00706*

Differential gear oil

Differential gear oil measurement
1. Place the machine on a level place.
2. Remove the oil filler bolt and check the oil
level. It should be up to the brim of the
hole. If the level is low, add sufficient oil to
raise it to the specified level.
1. Differential gear oil
2. Differential gear case oil filler bolt
3. Specified level
CAUTION:
Be sure no foreign material enters the dif-
ferential gear case.
3. Install the oil filler bolt and tighten it to the
specified torque.
Tightening torque:
Oil filler bolt:
23 Nm (2.3 m·kgf, 16 ft·lb)
Differential gear oil replacement
1. Place the machine on a level place.
2. Place a container under the differential
gear case to catch the oil.
3. Remove the filler bolt and drain bolt to
drain the oil.
1. Differential gear case oil drain bolt
8-18