Use; Control Panel; Controls - Zanussi FA 832 Instruction Booklet

Use

Control panel

1 Detergent dispenser drawer
2 Spin speed selector dial
This dial has the following positions:
• 0 = no spin;
• 300 = MIN, for all fabrics;
• 800 or 1000 = MAX, for cotton.
For synthetics, delicates and wool the maximum
position corresponds to 750 rpm.
The intermediate positions refer to spin speed values
for cotton.
3 Rinse hold button
By depressing this button the water of the last rinse
is not emptied out to avoid any creasing in the
laundry.
To drain water and spin, depress button
To drain only, select programme P.
4 Half load button
Select this button to reduce water consumption on
the rinse cycle when washing a half load of cottons
or linens.
5 Mains on light
This light is on whilst the machine is operating and
goes out at the end of the programme.
6 Temperature selector dial
Turn this dial to select the washing temperature.
Position
7 Programme selector Dial / ON-OFF
switch
To select the required programme, turn this dial
clockwise.
Pull the dial outwards to start the machine.
Depress the dial to interrupt or change a programme
and to switch the machine off.
again.
8
= cold wash.