Switches - Yamaha AR210 Owner's/Operator's Manual

If water is not circulating, something
may be clogging the jet intake grate.
Refer to the Jet Pump Clean-Out pro-
cedures on page 5-5 for further infor-
mation.
CAUTION:
If the cause of overheating cannot
be found and corrected, take special
precautions to avoid major engine
damage while you return to shore.
SINGLE ENGINE OVERHEATING —
Shut off the overheating engine and
use the properly running engine to
return to shore. Operate at "no-
wake" speed to prevent water from
flooding the non-operating engine
through the cooling water intake.
BOTH ENGINES OVERHEATING —
If getting a tow from another vessel
is not possible,
engines just slightly above idle
while you return to shore. If you can
be towed, refer to "Towing the boat"
on page 5-3.
operate both
2-11
F & F
EATURES

SWITCHES

3
2
1
Blower
1
Bilge Pump
2
3 CD Player
Blower
Press this switch to turn on the blower
to ventilate the engine compartment.
See 3-9 for more information.
Bilge Pump
Press this switch to activate the bilge
pump. See page 3-8.
CD Player
This is the master control for the CD
player. Press this switch to allow CD
player operation.
2
UNCTIONS