Yamaha BLASTER YFS200S Owner's Manual page 38

4. Tighten the locknut to the specified torque.
Tightening torque:
55 Nm (5.5 m0kgf, 40 ft0lbf)
cC
Always tighten the locknut to the specified
torque.
q WARNING
POTENTIAL HAZARD
This shock absorber contains highly pres-
surized nitrogen gas.
WHAT CAN HAPPEN
The shock absorber could explode, caus-
ing injury or property damage.
Cylinder damage could also result in poor
handling which could cause an accident.
HOW TO AVOID THE HAZARD
8 Do not tamper with or attempt to open
the cylinder assembly.
8 Do not subject the shock absorber to
an open flame or other high heat.
8 Do not deform or damage the cylinder
in any way.
8 Do not dispose of a damaged or worn
out shock absorber yourself. Take the
unit to a Yamaha dealer.
4-16