Yamaha BLASTER YFS200S Owner's Manual page 144

8. Install the headlight bulb holder cover.
cC
Make sure the headlight bulb holder cover is
securely fitted over the bulb holder and seat-
ed properly.
9. Install the headlight unit assembly by
installing the screws.
1
2
1. Headlight unit assembly
1
2
2. Screw (×2)
10. Install the headlight beam adjusting screw,
the washer, the spring and the nut.
4
1. Headlight beam adjusting screw
2. Washer 3. Spring
11. Connect the main switch leads.
12. Install the front panel by installing the
screws.
13. Adjust the headlight beam.
8-41
3
4. Nut
2
1