Yamaha BLASTER YFS200S Owner's Manual page 114

2
1. Air filter case cover
3. Remove the air filter element, and sepa-
rate the sponge material from its frame by
removing the screw.
q
w
1. Sponge material
1
2
2. Screw (×4)
2. Frame
4. Wash the sponge material gently but thor-
oughly in solvent.
q WARNING
POTENTIAL HAZARD
Using low flash point solvents or gasoline
to clean the sponge material.
WHAT CAN HAPPEN
Low flash point solvents or gasoline can
catch fire or explode.
HOW TO AVOID THE HAZARD
Use parts cleaning solvent to clean the
sponge material.
5. Squeeze the excess solvent out of the
sponge material and let it dry.
cC
Do not twist the sponge material when
squeezing it.
6. Inspect the sponge material. If damaged,
replace it.
8-11