Transmission Oil - Yamaha BLASTER YFS200S Owner's Manual

EBU12771

Transmission oil

Transmission oil measurement
1. Place the machine on a level surface.
2. Warm up the engine for several minutes,
and stop it.
3. Check the oil level through the level win-
dow located at the right side crankcase
cover.
NOTE:
Wait a few minutes until the oil level settles
before checking.
4. The oil level should be between the mini-
mum and maximum level marks. If the
level is low, add the recommended oil to
raise it to the proper level.
Transmission oil replacement
1. Place the machine on a level surface.
2. Warm up the engine for several minutes,
and stop it.
3. Place a container under the engine to col-
lect the used oil.
1
1. Level window
3. Minimum level mark
8-6
1
2
3
2. Maximum level mark