Power Trim And Tilt Will Not Operate; Engine Fails To Operate; Low Oil Level Warning Activates - Yamaha VZ300C Owner's Manual

Table of Contents

Advertisement

Trouble Recovery
2
3
4
1. Electrical cover
2. Fuse holder
3. Fuse (20A,30A,100A)
4. Spare fuse (20A,30A,100A)
5. Fuse puller
1. Fuse (20A,30A,100A)
2. Fuse puller
EMU29520

Power trim and tilt will not operate

If the engine cannot be tilted up or down with
the power trim and tilt/ the power tilt because
of a discharged battery or a failure with the
power trim and tilt unit/the power tilt, the en-
gine can be tilted manually.
1.
Loosen the manual valve screw by turn-
ing it counterclockwise until it stops.
61
3
1
3
ZMU01903
2
1
ZMU01904
5
4
1. Manual valve screw
2.
Put the engine in the desired position,
then tighten the manual valve screw by
turning it clockwise.
EMU29670

Engine fails to operate

EMU29740

Low oil level warning activates

If the oil level is allowed to drop too low, the
red segment will appear on the oil level indi-
cator, the buzzer will sound, and engine
speed will be limited to about 2000 r/min. If
this happens, a reserve amount of oil can be
pumped from the remote oil tank to the en-
gine oil tank using the emergency switch.
EWM01050
WARNING
Be sure to stop the engine before per-
forming this procedure.
ECM00900
CAUTION:
If the emergency switch is held up too
G
long, too much oil will be pumped into
the engine oil tank, overflowing it. Re-
lease the switch when oil reaches the
upper level line on the engine oil tank.
Do not use this emergency procedure
G
unless the oil level warning indicators
are working.
1.
Remove the top cowling.
1
ZMU02403

Advertisement

Table of Contents
loading

Table of Contents