Power Trim/Tilt Switch; Tilt Support Lever - Yamaha VX200C Owner's Manual

E
EMU01125

POWER TRIM/TILT SWITCH

The power trim/tilt adjusts the motor
UP
angle in relation to the transom. The
power trim/tilt switch is located on the
side of the bottom engine cowling.
Pushing the switch "UP" trims the motor
DOWN
up, then tilts the motor up. Pressing the
switch "DN" tilts the motor down and
302012
trims the motor down. When the switch
button is released, the motor will stop in
its current position.
w
Use the power trim/tilt switch located on
the bottom engine cowling only when
the boat is at a complete stop with the
engine off. Attempting to use the cowl-
ing-mounted power trim/tilt switch while
the boat is moving could increase the risk
of falling overboard and could distract
the operator, increasing the risk of colli-
sion with another boat or an obstacle.
NOTE:
Refer to the section "Adjusting Trim
Angle" and "Tilting Up/Down" for instruc-
tions on usage.
EMD60010

TILT SUPPORT LEVER

To keep the outboard motor in the tilted-
up position, lock the tilt support lever to
the clamp bracket.
403033
2-7