Front Wheel - Yamaha TT-R Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1
1
2
3
3
1. Tripmeter cable
4
2. Axle holder nut (×4)
3. Wheel axle
5

Front wheel

To remove the front wheel
6
It is advisable to have a
7
Yamaha dealer service the
wheel.
8
Securely support the machine
so that there is no danger of it
9
falling over.
1. Remove the tripmeter cable from
the front wheel.
2. Loosen the wheel axle holder
nuts, then the wheel axle.
3. Lift the front wheel off the ground
according to the procedure on
page 6-32.
4. Pull the wheel axle out, and then
remove the wheel.
2
Do not apply the brake after the
wheel has been removed together
with the brake disc, otherwise the
brake pads will be forced shut.
EAU03605
EW000122
ECA00048
1. Tripmeter gear unit
To install the front wheel
6-33
1
1. Install the tripmeter gear unit into
the wheel hub so that the projec-
tions mesh with the slots.
2. Lift the wheel up between the
fork legs.
EAU03606