Main Switch; Indicator Lights - Yamaha ZUMA CW50N Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
OFF
LOCK
4

Main switch

The main switch controls the ignition
and lighting systems. Its operation is
described below.
ON:
Electrical circuits are switched on and
the taillight comes on. The engine can
be started. The key cannot be removed
in this position.
NOTE:
When the engine is started, the
headlight and meter lights come on
automatically.
*
:
ON
The oil warning light will come on. For
details of the oil warning light, refer to
"Oil warning light" on page 4-2.
OFF:
All electrical circuits are switched off.
The key can be removed in this posi-
EAB00100
tion.
LOCK:
The steering is locked in this position,
EAB02300
and all electrical circuits are switched
off. The key can be removed in this
position. Refer to "Steering lock" (page
4-9) for operation instructions.
NOTE:
EUU10100
Always turn the main switch to "OFF"
or "LOCK" and remove the key when
the scooter is unattended.
EAB02100
EAB00600
1. "HIGH BEAM" indicator light "
2. "TURN" indicator light "
3. "OIL" level indicator light "
EAB00701

Indicator lights

"HIGH BEAM" indicator light "
This indicator comes on when the
headlight high beam is used.
"TURN" indicator light "
EUU00700
This indicator flashes when the turn
switch is moved to the left or right.
4-1
1 2
20
30
10
30
40
20
50
F
10
60
0 40
0
E
mph
mile 1
"
"
"
" :
FAU00027
3
EAB10000
EAB10300
":
EAB12403