Cooling System - Yamaha YZF-R6 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
10. Start the engine and warm it up for
several minutes. While warming
up, check for oil leakage. If oil
leakage is found, stop the engine
immediately and check for the
cause.
11. After the engine is started, the oil
level indicator light should go off if
the oil is at the specified level.
CAUTION:
@
If the indicator light flickers or re-
mains on, immediately stop the en-
gine and consult with a Yamaha
6
dealer.
@
12. Install the cowling.
1. Maximum level mark
EC000067
2. Minimum level mark

Cooling system

1. Check the coolant level in the res-
ervoir tank when the engine is cold
as the coolant level will vary with
engine temperature. The coolant
level should be between the maxi-
mum and minimum marks.
6-13
1. Bolt ( 2)
2. If the level is low, remove the res-
EAU01611
ervoir tank cover by removing the
bolts.
3. Add coolant or distilled water to
raise it to the specified level.
4. Install the reservoir tank cover and
bolts.
Reservoir tank capacity:
0.44 L