Changing The Coolant - Yamaha YZF-R6 Owner's Manual

CAUTION:
@
Hard water or salt water is harmful
to the engine. You may use distilled
water if you can't get soft water.
@
NOTE:
@
If water is added, have a Yamaha deal-
er check the antifreeze content of the
coolant as soon as possible.
The radiator fan operation is complete-
ly automatic. It is switched on or off ac-
cording to the coolant temperature in
the radiator.
@
5. If your motorcycle overheats, see
page 6-42 for details.
PERIODIC MAINTENANCE AND MINOR REPAIR
EC000080
1. Radiator cap

Changing the coolant

1. Remove panel C, cowling A and
cowling B. (See page 6-6 for re-
moval and
dures.)
2. Place a container under the en-
gine.
3. Remove the radiator cap.
6-14
1. Water pump drain bolt
2. Clamp bolt
EAU01612
4. Remove the water pump drain bolt
installation proce-
5. Disconnect the radiator hose by
6. Thoroughly flush the cooling sys-
and drain the coolant from the wa-
ter pump housing.
loosening the clamp and drain the
coolant completely.
tem with clean tap water.
6