Digital Speedometer - Yamaha YZF-R6 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Speedometer
2. Clock, odometer
3. "SELECT" button
4. "RESET" button

Digital speedometer

This speedometer is equipped with:
an odometer
two trip odometers
a fuel reserve trip meter
a clock
NOTE:
@
For UK and USA models only:
To change the speedometer display
from kilometers to miles, press the
"SELECT" button for at least two sec-
onds.
@
Odometer and trip meter modes
Use the trip meters to estimate how far
you can ride on a tank of fuel.
Use the fuel reserve trip meter to see
the distance traveled from when the
fuel level dropped to the reserve level.
Selecting a mode
Push the "SELECT" button to change
between the odometer mode "ODO"
and the trip odometer modes "TRIP 1"
and "TRIP 2" in the following order:
EAU01601
"ODO" "TRIP 1"
"ODO"
If the fuel level indicator light comes on
(see page 3-2), the odometer display
will automatically change to the fuel re-
serve trip meter mode "TRIP F" and
start counting the distance traveled
from that point. Push the "SELECT"
button to change between the fuel
odometer, trip odometer and odometer
modes in the following order:
"TRIP F" "TRIP 1"
"ODO" "TRIP F"
Resetting a meter
To reset a trip odometer to 0.0, select it
by pushing the "SELECT" button and
push the "RESET" button for at least
one second. To reset the fuel reserve
trip meter, select it by pushing the
"SELECT"
"RESET" button for at least one sec-
ond. The display will return to "TRIP 1".
If you do not reset the fuel reserve trip
meter manually, it will automatically re-
set and return to "TRIP 1" after refuel-
"TRIP 2" ing and the motorcycle has traveled
both 5 km and for approximately 3 min-
utes.
NOTE:
@
After the fuel reserve trip meter is reset,
the display always returns to the
"TRIP 1" mode. If "TRIP 2" was being
used before the fuel reserve trip meter
is reset, be sure to push the "SELECT"
button to change back to the "TRIP 2"
mode.
@
"TRIP 2"
3-7
button and push the