ITEM
Chassis fasteners
Fuel
Lights, signals and
switches
NOTE:
@
Pre-operation checks should be made each time the motorcycle is used. Such an inspection can be accomplished in a very
short time; and the added safety it assures is more than worth the time involved.
@
WARNING
@
If any item in the Pre-operation check list is not working properly, have it inspected and repaired before operating
the motorcycle.
@
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
• Check fuel level.
• Fill with fuel if necessary.
• Check proper operation.
PRE-OPERATION CHECKS
CHECKS
4-2
PAGE
—
3-9–3-10
—
4
EWA00033