3. Connect the headlight coupler.
Installing the headlight unit
1. Install the headlight unit by install-
ing the screws.
2. Connect the coupler to the main
switch/steering lock cover.
3. Install the main switch/steering
lock cover by installing the bolts.
4. Install the windshield.
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
PERIODIC MAINTENANCE AND MINOR REPAIR
Tail/brake light
This model is equipped with an LED
type of tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
6-30
EAU24180
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw, and then
turning the lens counterclockwise.
1. Screw
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by turning it clock-
wise, and then installing the screw.
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
EAU38380
6
ECA11190