Yamaha V-Star XVS1100S Owner's Manual page 74

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Ignitor unit panel
2. Spare main fuse
3. Main fuse
4. Turn the key to "OFF" and turn off
the electrical circuit in question.
5. Remove the blown fuse, and then
6
install a new fuse of the specified
amperage.
Specified fuses:
Main fuse:
30.0 A
Backup fuse:
5.0 A
Ignition fuse:
10.0 A
Headlight fuse:
15.0 A
Carburetor heater fuse:
15.0 A
Signaling system fuse:
10.0 A
Ignitor unit fuse:
5.0 A (CAL)
CAUTION:
Do not use a fuse of a higher amper-
age rating than recommended to
avoid causing extensive damage to
the electrical system and possibly a
fire.
6. Turn the key to "ON" and turn on
the electrical circuit in question to
check if the device operates.
7. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
6-31
8. Install the storage compartment
cover.
9. Place the ignitor unit panel in the
original position and install the
quick fasteners.
NOTE:
To install a quick fastener, push its pin
back so that it will protrude from the fas-
tener head, then insert the fastener and
push the protruding pin in until it is flush
with the fastener head.
ECA10640
1. Quick fastener (after removal)
2. Quick fastener (before installation)
10. Install the rider seat.