Yamaha V-Star XVS11V Owner's Manual page 77

Table of Contents

Advertisement

NOTE:
Include steps 1–3 and 8–9 only for the
main fuse.
1. Remove the rider seat. (See page
3-9.)
2. Remove
the
quick
shown by pushing the center in
with a screwdriver, then pulling the
fastener out.
1. Quick fastener
3. Pull the ignitor unit panel outward
to the right.
PERIODIC MAINTENANCE AND MINOR REPAIR
fasteners
1. Ignitor unit panel
2. Spare main fuse
3. Main fuse
4. Turn the key to "OFF" and turn off
the electrical circuit in question.
5. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
CAUTION:
Do not use a fuse of a higher amper-
age rating than recommended to
avoid causing extensive damage to
the electrical system and possibly a
fire.
6. Turn the key to "ON" and turn on
7. If the fuse immediately blows
6-32
Specified fuses:
Main fuse:
30.0 A
Backup fuse:
5.0 A
Ignition fuse:
10.0 A
Headlight fuse:
15.0 A
Carburetor heater fuse:
15.0 A
Signaling system fuse:
10.0 A
Ignitor unit fuse:
5.0 A
the electrical circuit in question to
check if the device operates.
again, have a Yamaha dealer
check the electrical system.
ECA10640
6

Advertisement

Table of Contents
loading

Table of Contents