Yamaha V-Star XVS11V Owner's Manual page 34

INSTRUMENT AND CONTROL FUNCTIONS
XVS11V
3
1. Spring preload adjusting ring
2. Position indicator
3. Special wrench
XVS11AWV/XVS11ATV
1. Position indicator
2. Spring preload adjusting ring
3. Special wrench
Spring preload setting:
Minimum (soft):
1
Standard:
XVS11V 3
XVS11AWV 4
XVS11ATV 4
Maximum (hard):
XVS11V 7
XVS11AWV 9
XVS11ATV 9
6. Install the mudguard and ignitor
unit panel by installing the quick
fasteners.
NOTE:
To install a quick fastener, push the pin
back so that it will protrude from the fas-
tener head, and then insert the fastener
and push the protruding pin in until it is
flush with the fastener head.
3-15
1. Quick fastener (after removal)
2. Quick fastener (before installation)
7. Install the rider seat.
WARNING
This shock absorber contains highly
pressurized nitrogen gas. For prop-
er handling, read and understand
the following information before
handling the shock absorber. The
manufacturer cannot be held re-
sponsible for property damage or
personal injury that may result from
improper handling.
G Do not tamper with or attempt to
open the gas cylinder.
EWA10220