Yamaha VIRAGO XV250P Owner's Manual page 33

PRE-OPERATION CHECKS
ITEM
Drive chain
Wheels and tires
Brake and shift pedals
Brake and clutch levers
4
Sidestand
Chassis fasteners
Instruments, lights, signals
and switches
Sidestand switch
Battery
NOTE:
_
Pre-operation checks should be made each time the motorcycle is used. Such an inspection can be accomplished in a very
short time; and the added safety it assures is more than worth the time involved.
_
WARNING
_
If any item in the Pre-operation check list is not working properly, have it inspected and repaired before operating
the motorcycle.
_
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
• Check operation.
• Correct if necessary.
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
• Check fluid level.
• Fill with distilled water if necessary.
CHECKS
4-2
PAGE
6-22–6-23
6-14–6-16
6-26
6-27
6-27
—
—
3-10–3-11
6-30–6-31
EWA00033