XSAT CD.TV410 Manual page 7

Scart plug
(VCR/AUX)
to connect to an
external source
Scart plug (TV)
(video recorder
to connect to
or another satellite
the television
receiver).
S/PDIF digital audio output.
Remove the cover before use.
• Digital audio connection
You can connect your CD.TV410 to
a Hi-Fi or Home-Cinema system with an
optical fibre cable via the S/PDIF socket.
This will give you access to digital quality
sound.
IMPORTANT: the S/PDIF socket is
protected by a dust cover.
Remove the cover before plugging in
the optical fibre cable connector. Keep
the cover in a safe place for future use.
The cover is designed to protect the
socket from dust.
YOUR DIGITAL RECEIVER
sockets for
computer system
link (serial),
applications.
set.
Peripheral
Satellite antenna input
for future
• Connecting the satellite signal
Connect the "INPUT" to the satellite dish,
using a coaxial cable with a F plug. If there
is no F plug fitted on the cable: isolate the
cable as shown in the diagram below and
carefully screw it onto the cable until it
stops. While fitting the plug, make sure
there is no contact between the outer
metal strap and the core, to prevent
a short-circuit.
2
Satellite antenna output
35