Channel Scan - XSAT CD.TV410 Manual

Scanning mode
Satellite

CHANNEL SCAN

With the "Channel List/Scan satellite"
menu, you can scan the available
channels on selected satellite(s).
Only the satellites defined on the config-
uration screen can be used.
Three scan modes are available:
- Fast (NIT)
- Exhaustive
- Frequency
Use the buttons to select the mode.
Fast scan (NIT)
This is the fastest scan (normally less
than two minutes for a complete satellite).
It uses an information table broadcasted
by the satellite in accordance with the
DVB standard (NIT: Network Information
Table). This table includes most of the
programs available on the satellite.
CHANNEL SCAN
Scan satellite
Fast (NIT)
ASTRA
NIT parameters
This method is quick and easy, although
it can only find the services defined by
the NIT. This depends on the operator.
Press the Blue button to change NIT
parameters.
Press to start the fast scan. A screen
displays:
In the "Fast Scan" progress screen you
can read:
- the number of transponders (frequen-
cies) found,
- then, during the scan, the number
of TV and radio programs found.
Press to validate the scan result.
Wait a few seconds for the CD.TV410
to save the scan result.
7
45