Parental Lock And Smart Card - XSAT CD.TV410 Manual

10
Your CD.TV410 receiver offers two
protection options : parental lock and
maturity rating.
The parental lock is a function internal
to the CD.TV410. The maturity rating
is specific to certain conditionnal
access, including Viaccess.
The parental code is available from
the "Parental lock" menu. This code has
four digits. The preset factory code
is "1234". If this code is activated, access
to the menu and locked channels will be
restricted. You will only be able to access
unlocked channels.
To disable the parental lock, enter the
same code, then deactivate it in the
"Parental unlock" menu.
The pre-set code can be changed as
desired, in the "Configuration/Prefer-
ence/Change parental code" menu.
Important: Do not forget this code,
as you will lose access to a large
number of receiver functions. If you
should forget it, contact your
supplier's after-sales service.
You can view the characteristics of the
smart card(s) inserted in your receiver
with the "Smart card" command of the
"Configuration" menu.
For each smart card reader, CD.TV410
recognises whether or not a card is
inserted, together with its conditionnal
access. The cards recognised depend
on your receiver model.
52
PARENTAL LOCK - SMART CARD
PARENTAL LOCK
SMART CARD
Select the card using the
then press . Depending on the type
of card, a menu appears.
You can consult your current access
rights with any type of smart card,
to check on subscription validity.
Important: If the receiver has not been
switched on for more than a few
weeks, your card rights may not have
been updated.
Maturity rating
With some smart cards, like Viaccess, a
maturity rating, protected by a secret
code, can be defined.
A maturity rating from 0 to 15 restricts
access to certain programs. Operators
broadcast a rating for each program,
based on content. It's up to you to decide
the maturity level you want. If the broad-
cast level is higher than the level defined,
the program will be off limits to anyone
who does not know the secret code.
Important: The code is registered in
the smart card. If you should forget
this code, you will have to refer to your
smart card supplier to get it reinitia-
lised.
buttons,