Eeprom Programs - Whites DXF Manual

Factory Pre-Loaded Custom

EEPROM Programs

White's has pre-loaded each of the four custom
EEPROM Program positions for you. These pro-
grams can be erased simply by developing your
own program, starting with any of the nine avail-
able programs, and using the SAVE or NAME
feature (pages 16-17).
The first five Factory Preset Programs are burnt into
permanent memory EPROM (Electronic, Program-
mable, Read, Only, Memory). Although you can
make changes to these programs while in use, and
you can modify and copy/save them to the
EEPROM positions for future use through battery
changes, the Factory Preset Programs will always
revert to their original factory settings. Only the
programs saved in one of the four available
EEPROM positions will save through battery
changes.
Short term memory recall (ON and squeeze and
release the trigger) will maintain changes to a
factory program if a good battery remains in the
unit. To assure you retain special settings it is
advised to Save or Name them in one of the
EEPROM positions. Once you modify and Save/
Name a factory program to one of the EEPROM
positions it is no longer a Factory Preset Program
and thus will save for future use.
EEPROM stands for a special type of electronic
memory chip (Electrical, Erasable, Programmable,
Read, Only, Memory). This memory chip allows the
user to store up to four of their own programs for
future use through battery changes and storage.
Chapter 5 DFX
To use a custom EEPROM Program Simply;
1. Turn the detector ON and wait for the
Main Menu.
2. Press ENTER to enter the Preset programs.
3. Use ARROW DOWN to scroll down the
Preset Program pages/screens until you see
thecursor beside the EEPROM program
you desire.
4. Press ENTER.
5. Press ENTER again to LOAD the program.
6. Air/Ground Balance and your ready to search
using the program stored in that position.
To store the current settings you are using do the
same thing only instead of LOAD, select SAVE or
NAME. LOAD it when you want to use those
settings again. Save or Name if you want to save
the DFX's current settings.
The idea is that once you have determined your
preferences for the particular features and settings,
you can store that entire program in one of the
EEPROM positions and have it ready for use
whenever you desire, without having to go through
all the options. Save your settings for future turn on
and go use.
™ EEPROM Programs
53