Autotrac; Trac View - Whites DXF Manual

AUTO TRAC
ON
OFF
TO CHANGE PRESS ENTER
Tips - Use ON for most
search conditions.

TRAC VIEW

ON
OFF
TO CHANGE PRESS ENTER
TRACK
-95
Tips - Use when experi-
menting with different
TRAC SPEEDs to deter-
mine if, and how often,

AUTOTRAC

® automatically
adjusts Ground Balance.
Chapter 5 DFX
(G.E.B./Trac section)
6. AutoTrac
AUTOTRAC
cally readjust the Ground Balance setting during
searching. This readjustment allows for natural
occurring changes in the ground mineral of an area.
By maintaining an accurate Ground Balance,
detection depth and stability are enhanced. AUTO
®
TRAC is recommended for typical search condi-
tions. If, however, a great deal of decomposed
man-made iron is encountered, AUTOTRAC
or a reduced AUTOTRAC
AUTOTRAC
INHIBIT.
(G.E.B./Trac section)
7. Trac View
When ON, "TRACK" appears on right side of
display when AUTOTRAC
the Ground Balance setting.
TRAC VIEW offers a way to observe
Autotracking. When ON, "TRACK" will appear
momentarily on the right-hand side of the display
just above the SignaGraph
adjusting. This information is valuable when
+95
attempting to determine an appropriate Trac Speed.
It may also be a valuable aid in determining the
relative ground conditions. Reoccurring "TRACK"
would indicate difficult ground. In average ground
it is desirable to see some tracking occur (see
TRAC SPEED).
™ Pro Options
®
®
allows the instrument to automati-
®
SPEED is advised.
®
operation is affected by TRAC
®
makes adjustments to
®
while AUTOTRAC
®
OFF,
®
is
31