Instruction For Use; Initial Operation; Temperature Control; Automatic Defrost Function - Dometic HiPro 3000 Instructions For Use Manual

5 5 . . 0 0

INSTRUCTION for USE

5.1

Initial Operation

5.2

Temperature Control

The miniBar is fitted with an electronic
temperature control which works fully
automatically.
A preadjustment of 3° or 5° is possible by
means of an optional remote control.
5.3

Automatic Defrost Function

The first defrosting phase commences 39 hours after the initial operation
and lasts for two hours.
After this, the device operates for 22 hours at a time, followed by a
defrosting period of 2 hours .
5.4

Leakage Detection

The electronics carry out a leakage test after every defrosting period
(every 24 hrs) by measuring the temperature at the evaporator by means of
a second sensor.
If the electronics detect a leak, the miniBar is automatically switched off .
The LED for the interior lighting changes after approx. 10 secs. to a conti-
nuous flashing. (The LED of the door-opening control flashes synchronous-
ly , if available.)
The miniBar
operates silently !
The ice layer must never be removed using force, nor
must the defrosting process ever be accelerated using a
heater.
The device must be plugged into a properly
earthed socket.
The miniBar starts automatically with a self-
test. If the electronics do not detect any
fault, the LED for the interior lighting illumi-
nates for 2 seconds after approximately 10
seconds. If a fault is detected, the illumina-
tion changes to a continuous flashing light.
If this occurs, please consult your authorised
Customer Service.
The miniBar achieves its operating
temperature after several hours.
YELLOW = 3°C
11
BLUE = 5°C