Table of Contents
Advertisement
Streaming Audio with the 900MHz Wireless Transmitter
1. Make sure the 900MHz transmitter is on and that there's something playing on your audio
source. Turn your audio source up to at least 3/4 full volume.
2. If the speaker isn't already on, press the On-Off button to turn it on.
3. The indicator light starts fl ashing, which means the speaker is trying to link with the
900MHz wireless transmitter. The indicator light turns solid blue when the speaker is tuned
to the 900MHz wireless transmitter—you should hear sound coming from the speaker now.
Note: If the speaker is not linked to the 900MHz transmitter, or if the transmitter isn't
connected properly, the indicator light will continue to blink. If this occurs, please see the
Troubleshooting section of this manual.
IMPORTANT:
The indicator light on the back of the speaker indicates the status of the
wireless connection only. If you're not using the transmitter (or if you're out of range of the
transmitter) it will keep blinking until it fi nds the transmitter. This is normal.
4. Adjust the volume on the speaker as desired.
Notes: If you're using a single speaker with this transmitter, keep the L/M/R switch on the
bottom of the speaker in the "M" position (for mono). If you're using more than one speaker
with this transmitter, set the speakers to the "L" (left) or "R" (right) positions according to
their orientation to the listener.
The speaker automatically retunes if it loses the transmitter's signal. You can also press the
AutoScan button on the back of the speaker to retune the speaker at any time.
The transmitter turns off automatically if there is no audio signal present for a prolonged
period.
Interference in the form of static and/or distortion can sometimes be heard. If this occurs,
confi rm the transmitter/speaker adjustments and indicators. If the problem persists, refer to
the Troubleshooting section of this manual.
Using the Auxiliary Audio Input
Making a Direct Connection
1. Connect one end of the provided 3.5mm audio in cable
to the AUDIO IN jack on the back of the speaker.
2. Connect the other end of the cable to the headphone
output on your MP3 player or other portable audio
device.
3. If the speaker isn't already on, press the On-Off button to
turn it on.
Warning:
This product is designed to work with line level
outputs or headphone outputs only.
directly to speaker outputs as it will permanently damage
the speaker.
1. Press the On-Off button on the
2. Confi rm that the speaker is off
The following troubleshooting gu
associated with the installation an
please call toll-free at 1-800-732-6
DO NOT
connect it
Turning the
panel is no longer illuminated.
Troublesho
Issue:
Cause and so
No sound
• Check that the tr
and the power co
power input jack
• Confi rm that the
light on the back
• If you're using th
transmitter) are
are fi rmly connec
or
• If you're using ba
with correct pola
• Check that the a
transmitting sou
• Make sure the vo
• Check that the sp
• If you are using a
output, check tha
of the receiver. T
active.
Issue:
Cause and so
Sound is
• When using batte
distorted or
necessary.
has static
• Check that the sp
source is connec
• Change the posit
operating freque
to make the spea
• Change the locat
obstructions as p
a TV.
• Move the transm
certain materials
transmitting dist
Advertisement
Table of Contents
