Using This Manual - Accusys ACS-76500 Owner's Manual

Preface

Using this manual

This guide contains all the information you need to set up and start using your RAID controller
and to monitor its performance in real time. The setup process will follow these steps:
Prepare:
Configure:
Install:
Application
When you have reached this point, your RAID controller will be ready for use. To get the most
from your controller, you should also set up the ACSView GUI on your system. With this
browser you can monitor the status of your array at any time and from any computer on your
LAN. You will find full installation instructions and information on the monitoring capabilities of
ACSView in the ACSView (7 series GUI) User's Manual. Ask your vendor for details.
Familiarize yourself with the features and capabilities of
ACS-76500/76510 (Chapter 1)
Information about RAID 1 array (Chapter 2)
Set the Master / slave configurations (Chapter 3)
Attach the necessary cables and either mount the RAID
box inside your system or set up the RAID box externally
(Chapter 3)
Ways to use the RAID according to different configuration
(Chapter 4)
3