Sd/Mmc Operations - VIETA VPC350R Owner's Manual

11. SD/MMC OPERATIONS

1.Press panel release button to release the front panel.(P .1)
2.The SD/MMC card slot is located on the unit as indicated in (P .2).
3. Insert the SD/MMC card into the card slot in the correct direction until a "CLICK" sound
is heard.(P .3)
4.Close the front panel.(P .4)
P .1
Detach the
Front Panel
5. The display will show "SD PLAY" to indicate that the SD or MMC card is correctly inserted.
Once the SD or MMC card is inserted, the MP3 file will automatically loaded & playback will
also start.
6. Does not matter the unit is in what mode
is being inserted in the unit, unit will automatically switch to SD / MMC mode.
7. All the SD / MMC files playback function is same as normal CD or MP3 disc playback.
(Please refer to section CD operations & MP3 operations)
TO STOP SD/MMC CARD PLAYBACK
1.Push on the end of the SD or MMC card to eject the sd or MMC card. Once the SD or MMC
card is taken out, the unit will automatically switch to previous mode.(P .5-P .6)
2.User can use the mode button to choose SD / MMC mode (only if SD or MMC is inserted in the
unit ) or any other modes, when they are in any mode.
P .5
Push in till heard a "click"
WARNING
1.Please make sure to insert the SD or MMC card in the correct direction / orientation as
indicated in picture (P .7). Wrong insert will cause permanent & serious damage to the unit &
the SD or MMC card.
2. Always make sure the SD or MMC card is completely inserted before re-attaching the front panel.
P .7
P .2
Face
Up
Insert the SD/MMC Card
with Label up side
Click
Front side
P .3
Push in till heard a "click"
(Tuner, CD, USB,etc), once a SD or MMC card
P .6
Remove the Memory Card
Back side
BR - 14
P .4
Click
Close the front Panel