Radio Operations - VIETA VPC350R Owner's Manual

7. RADIO OPERATIONS

9) RADIO SIGNAL STRENGTH METER (RSLM)
This is use to indicate the signal strength of current radio station broadcast. When you
choose RADIO mode, it will show on the display.
10) AUTO MEMORY STORE/PRESET SCAN BUTTON (AS/PS)
1.PRESET SCAN: Press AS/PS button briefly to enter Preset Scan mode, it will scan all the
preset stations in the memories, you can hear that it will stay on each station for about 5
seconds.
2.AUTO MEMORY STORE: Press AS/PS button for couple of seconds to enter Auto Store
mode, this feature will automatically scan the current band and enter up to 6 strongest
stations into the 6 preset memories. To stop Auto Store & Scan, press the AS/PS button
again.
7) STATION PRESET BUTTONS (M1-M6)
1.Press these buttons briefly to recall the stored stations in the selected band.
2.Presetting stations manually, Press the BAND button to select the band for the station to
be preset. Use Tuning Up/Down to tune in the stations to be preset. Press the Preset
button at which you want to store the station for at least 2 second. The preset number will
appear on the display accompanied by a beep, this indicate that the station has been
stored into memory.
15) BAND/LOUDNESS BUTTON (BAND/LOUD)
This a dual function button. Press this button short to change between BAND FM1, FM2, FM3
& AM/MW bands. Press it long to turn on or off Loudness function.
8) TUNING / SEEK UP AND TUNING / SEEK DOWN BUTTONS
1.Press these buttons briefly will operate AUTO SEARCH tuning mode, the radio will tune up or
down to the next station and remain on the frequency.
2.Press these buttons more than 2 seconds, operate as MANUAL SEARCH buttons, under
this mode the tuning frequency will advance up or down rapidly when the button is
pressed. If the buttons are not pressed within 3 seconds, they will return to auto search
mode.
Best
reception
Worst
reception
BR - 8