Connecting The Analogue Stereo System; Connecting The Usb Device; Connecting The Ac Power Cord - VIETA VBR500 Owner's Manual

Connecting the analogue stereo system

- Connect the AUDIO L/R line out terminals on this product to the AUDIO input terminals on
the device.

Connecting the USB device

- Connect the USB device to the USB terminal on this product.
Note:
- Connect a USB device only to the USB terminal on this product.

Connecting the AC Power Cord

Connect the AC power cable of this product to the wall socket. This product is ready to be ready
for use.
Caution: Be sure to unplug the power cord from the outlet when going away or the system is
not in use for an extended period of time.
BDP600_draft_30 Oct 09.indd 7
AUDIO IN
7
2009-11-2 17:19:00