Getting Started; How To Insert A Disc; Switch On And Set Up The Player - VIETA VBR500 Owner's Manual

Getting started

How to insert a disc

1. Press Open/Close ( K ) to open the disc tray.
2. Place the disc on the disc tray with its label side facing up.
3. Press Open/Close ( K ) to close the disc tray.

Switch on and set up the player

The unit turns on automatically after the power cord is inserted into the power connector in the
first time. The following screen appears:
Welcome
to use BD Player Setting Wizard!
Some simple settings are needed before you
enjoy it. Please make detail settings of home
menu later.
Choose
a resolution that fit your TV.
Change will be applied immediately, you have
15s to determine whether to save the setting or
rollback to prior resolution. Better performance
will be provided by a HDMI connection!
Setting
wizard is to be finished!
Now press Finish button to go to Home Menu.
Please enjoy it.
Follow the on-screen instructions to select your language and complete your setup.
BDP600_draft_30 Oct 09.indd 12
Align the disc to the disc tray guide.
Page:1/5 Initial Wizard
ENTER Next
Page:3/5 Initial Wizard
Auto
480I/576I
480P/576P
720P
1080I
1080P
Previous ENTER Next
Page:5/5 Initial Wizard
Previous ENTER Finish
Page:2/5
Choose
an OSD lanugage before starting.
The language selected will be applied not only
here but also in other OSD windows, menus etc.
Previous
Page:4/5
Choose
an aspect ratio that fit your TV
Change will be applied in next page, you should
determine whether to save the setting or
rollback to prior aspect ratio.
Previous
12
Initial Wizard
English
French
ENTER Next
Initial Wizard
16:9 Full
16:9 Normal
4:3 Pan & Scan
4:3 Letterbox
ENTER Next
2009-11-2 17:19:04