Before Connection; For Your Safety; Precautions - VIETA VBR500 Owner's Manual

Before Connection

Thank you for purchasing this component system, in order to fully utilize this system, please
read this instruction book carefully before use it.

For your safety

RISK OF ELECTRIC SHOCK
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE, REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Caution:
To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
Power Requirement
Because the power requirement of electrical products is different in various places, before
you use this product, make sure that the power requirement of the product matches your
household power.
Laser Product
This product is equipped with low power laser equipment inside. For your safety, don't take
apart any covers or try to take apart the product inside. Please contact an authorized service
person for repairing.
LASER PRODUCT

Precautions

1. Before operating this system, check the voltage of this system to see if it is identical with
the voltage of your local power supply.
2. Unplug the system from the wall outlet if it is not used for a long time. To disconnect the cord,
pull it out by grasping the plug.
3. To avoid electric shock, do not open the cabinet.
4. There is no user serviceable parts inside. In case of system failure, unplug the power cord
and consult your dealer.
5. Do not place this unit on an unstable cart or sloping surface. Ensure good ventilation
surrounding the product. To prevent fire, do not cover the ventilation of the apparatus with
news papers, tablecloths, curtains, etc.
BDP600_draft_30 Oct 09.indd 2
CAUTION
DO NOT OPEN
CLASS 1
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompany-
ing this unit.
Caution:
This product is equipped with low power laser
equipment inside, for your safety, do not open
the laser radiation protective equipment.
Don't look at the laser radiation when the
equipment is operating.
2
2009-11-2 17:18:57