Table of Contents
Advertisement
5 "INICIO / PAUSA" button (START/PAUSE)
After having selected the programme and the
required options press this button to start the
machine. The corresponding pilot light stops flashing
and remains lit.
To interrupt a programme which is running, depress
the START/PAUSE button: the corresponding pilot
light starts to flash.
To restart the programme from the point at which it was
interrupted, press the START/PAUSE button again.
6 "SPIN REDUCTION" button
By depressing this button you can reduce the final
spin speed proposed by the machine or select the
"Rinse Hold" option
illuminates.
The maximum speeds are:
• for cotton: 1200 r.p.m.
• for synthetics,wool and hand wash: 900 r.p.m.
• for delicate fabrics: 500 r.p.m.
When selecting"Rinse Hold" option
of the last rinse is not emptied out, to prevent the
fabrics from creasing.
At the end of the programme the pilot light "FIN"
(END) illuminates and the "Rinse Hold"
stays on. To drain water, proceed as follows:
- turn the programme selector dial to position "O" to
switch the machine off;
- select programme
- press START/PAUSE button.
The light "LAVADO" comes on during the drain or
the spin programme. At the end of the programme
the light "FIN" illuminates again.
. The relevant light
, the water
light
(drain) or
(short spin);
7 Programme display
When you select the programme, the light
corresponding to the selected speed or the "Rinse
Hold" option lights up.
SPIN SPEED LIGHTS: are on during the washing
programme and remain alight at the end of the cycle.
"RINSE HOLD" option
option, the light "Rinse Hold"
washing together with LAVADO light and at the end
of the programme it will remain lit.
LAVADO: when this light comes on this means that
the machine is performing the washing programme.
If you have selected the PREWASH function, this
light will be on during the prewash phase too.
FIN: when the programme has finished, the "FIN"
(END) pilot light comes on.
The "FIN" (END) light flashes in the event of
operating problems:
• 4 flashes: door open
• 2 flashes: problem with water draining
• 1 flash: problem with water supply
For more information see paragraph "Something not
working"?
34
: If you have chosen this
will stay on during
Advertisement
Table of Contents
