Programme Progress Display - Zanussi ZWF 3100 User Manual

5. INICIO / PAUSA button
After selecting the required programme, by the
programme selector (see section 8), press this
button to start the machine; the corresponding
light stops flashing and will keep lighting until
the programme finishes.
To interrupt the running programme, depress
INICIO / PAUSA button: the corresponding
light starts to flash.
To restart the programme from the point at
which it was interrupted, press INICIO / PAUSA
button again.
6. REDUCCIÓN CENTRIFUGADO
button
This button allows the reduction of the final and the
intermediate spin speed or to select the
ANTIARRUGAS option.
Press this button so many times as it was necesary
until the relevant light turns on corresponding to the
wished option.
The speeds on the lights reference to cotton
programmes in both models (ZWF380 and
ZWF3100).
• For the model ZWF3100:
- The light 1000 r.p.m. correponds to 900 r.p.m. in
synthetics and wool programmes and in the
delicates programmes corresponds to 700 r.p.m.
- The lights 700 r.p.m. and 500 r.p.m. are common
for all programmes making reference to the same
speed.
• For the model ZWF380:
- The light 800 r.p.m. correponds to 700 r.p.m. in the
delicates programmes.
- The lights 700 r.p.m. and 500 r.p.m. are common
for all programmes making reference to the same
speed.
NOTE: In both models, by default, the light of spin
speed will turns on according to the selected
programme.
RINSE HOLD: by selecting this option, the water
of the last rinse is not drained, in order to prevent
the fabrics from wrinkling. When the programme has
finished, FIN light will illuminate.

7. Programme progress display

The light LAVADO will iluminate during all the
programme, turning off when it has finished.
The light FIN will illuminate to indicate that the
selected programme has finished.
The light FIN flashes in the event of operating
problems:
• 4 flashes: door open.
• 2 flashes: problem with water draining.
• 1 flash: problem with water supply.
For more information see paragraph "Something not
working?" at the end of this booklet.
35