Zanussi ZWG 3129 Instruction Booklet page 17

6. Select the required option(s)
The light corresponding to the depressed button
illuminates.
7. Select the DELAY START
Before you start the programme, if you wish the
starting to be delayed, press the DELAY START
button repeatedly, to select the desired delay. The
relevant light illuminates.
8. Start the programme
To start the selected programme, press the
START/PAUSE button; the corresponding light stops
flashing.
The LAVADO (WASHING) light illuminates.
The machine starts operating.
If you have chosen a delayed start, the machine will
begin the countdown.
9. Altering a programme or an option
You can alter the programme before it starts.
When the programme has started, you can only
reset it by turning the programme selector dial to O
and then you can select the new programme.
The washing water remains in the tub.
Start the new programme by depressing the
START/PAUSE button.
If you wish to change some options after the
programme has started, first set the machine to
PAUSE by pressing the START/PAUSE button.
Now, it is possible the options, the spin speed and
the washing temperature, if they have not been
executed by the appliance.
10. Interrupting a programme
Depress the START/PAUSE button to interrupt a
programme which is running, the corresponding light
starts to flash. Depress the button again to restart the
programme.
11. Cancelling a programme
Turn the selector dial to O to cancel a programme
which is running. Now you can select a new
programme.
12. Opening the door after the
programme has started
First set the machine to PAUSE by pressing the
START/PAUSE button.
If the door does not open, this means that the
machine is already heating, that the water level is
above the bottom edge of the door or that the drum
is turning.
If you cannot open the door but you need to open it
you have to switch the machine off by turning the
selector dial to "O". After about 3 minutes the door can
be opened (pay attention to the water level and
temperature!).
40