Programme Progress Display - Zanussi FL 1015 Instruction Booklet

6 "INICIO/PAUSA" button (START/PAUSE)
After having selected the programme and the
required options press this button to start the
machine. The corresponding pilot light stops flashing
and remains lit.
To interrupt a programme which is running, depress
the Start/Pause button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it was
interrupted, press the START/PAUSE button again.

7 Programme progress display

By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on.
PRELAVADO / LAVADO = Prewash/wash
When this light comes on this means that the
machine is performing the washing phase. If you
have selected the PRELAVADO (Prewash)
function, this light will be on during the prewash
phase too.
ACLARADOS = rinses
CENTRIF. = spin
DESCARGA = drain
FIN = end of programme
At the end of the programme the pilot light FIN
illuminates.
The "FIN" (END) light flashes in the event of
operating problems :
4 flashes: door open
2 flashes: problem with water draining
1 flash: problem with water supply
For more information see paragraph "Something not
working"?
8 Spin speed selector dial
This dial allows you to reduce the final and the
intermediate spin speeds or to select the NO SPIN
or RINSE HOLD (ANTI-ARRUGAS)
The speeds on the dial refer to programmes for
cotton.
For synthetics, handwash and wool:
position 1000 corresponds to 900 r.p.m.
For delicates:
Position 1000 corresponds to 700 r.p.m. and 500
corresponds to 450 r.p.m. for delicates.
NO SPIN : by selecting this option all the
spinning phases are suppressed. To be used for
extremely delicate items.
The machine will add 3 rinses on cotton
programmes and 1 rinse on synthetic
programmes.
RINSE HOLD (ANTI-ARRUGAS)
selecting this option the water of the last rinse is
not emptied out to prevent the fabrics from
creasing. When the programme has finished the
phase light END is on and the door is blocked to
indicate that the water must be emptied out.
To do this:
turn the programme selector dial to "O" to
switch the machine off.
select the drain
Using the spin speed selector dial you can
choose the desired spin. If the dial remains on
position
or
spin speed at 400 rpm.
depress START/PAUSE button.
The light "DESCARGA" (drain) or "CENTRIF." (spin)
comes on during the drain or the spin programme. At
the end of the programme the light "FIN" illuminates
again.
11
option.
: by
or spin programme.
the machine will perform the