Table of Contents
Advertisement
Installation
The following instructions are meant to a qualified
technician, in order to allow him carry out the
installation in compliance with the rules in force.
The building-in and the electrical connection fo the
appliance must be carried out by a qualified and
authorized technician only.
Building In
It is important that the dimensions and materials of the
surround or cabinet into which the oven will be built are
correct and will withstand a temperature increase.
A correct installation will have to ensure a proper protection
against contact with electric parts or merely functionally
isolated parts.
All the units meant to ensure protection have to be fitted
not to be taken away without using any tool.
We recommed not to install the appliance near refrigerators
or freezer, since the heat could affect the performance of
these appliances.
Oven dimensions
The oven dimensions are shown in Fig. 33.
In-Column recess dimensions
The recess must have the dimensions shown in Fig. 34.
Undertop recess dimensions
The recess must have the dimensions shown in Fig. 35.
Securing the oven to the cabinet
-
Fit the appliance into the cabinet recess.
-
Open the oven door and secure the oven to the kitchen
cabinet with four wood screws, which fit the holes
provided in the oven frame (Fig. 36).
When installing an electric plate hob over the oven, the
hob's electrical connection and the oven's one have to be
carried out separately, for security reasons and to let the
oven be taken off the unit easier, if necessary.
20
Fig. 33
Fig. 34
FO 0290
Fig. 35
Fig. 36
Advertisement
Table of Contents
