Table of Contents
Advertisement
IBM System Storage DR550
Switch Zoning when Remote Mirroring
is installed (Factory Settings)
9131-52A
Slot 5
Zone 1
0
1
Zone 2
Zone 3
8
Zone 4
9
Zone 5
Not
Zoned
Controller A-1
DS4100
Note: Zone 3 is configured for use with tape (TS1120, LTO Gen 3, or 3592 drives with WORM cartridges are
recommended - ports 5-7 are available to connect to tape drives)
Zones 4 & 5 are configured for use with data replication (DS4100 enhanced remote volume mirroring)
Per IBM recommendations, the ports used to connect the switches are not included in the zones for remote mirroring
These zoning configurations may be needed if you ever need to rezone the 2005-B16.
For more information, 2005-B16 data sheets can be downloaded from:
http://www-03.ibm.com/servers/storage/san/b_type/san16b-2/express/
Should one of the switches fail (dual node configurations only), the logical volumes within the
DS4100 systems are available through the other controller and switch.
IBM Storage Systems
2
3
4
5
6
10
11
Controller A-2
Version 3.0 ------17 March 2006
Slot 4
2005-B16
7
Controller B-1
Copyright © 2006 by International Business Machines Corporation
Slot 1
Controller B-2
Connects to Switch in
secondary DR550
Page 13
Advertisement
Table of Contents
