Table of Contents
Advertisement
◆ Confirmation: Allows you to set whether a confirmation screen is displayed each
time synchronisation starts.
◆ Database Settings: Allows you to set the database of the selected server.
• Location: Allows you to set the location for saving data on the server.
• User ID: Allows you to set the User ID for the database.
• Password: Allows you to set the login password for the database.
• Synchronisation: Allows you to set Enable or Disable.
◆ Network Settings: Allows you to set the network connection information
(network access point, proxy) of the selected network.
10. Press
(Options).
11. Select Save and press
Synchronising the Contacts List
1. In standby mode, press
2. Select Synchronise and press
3. Select Server Profile and press
4. Select a server and press
A confirmation screen appears.
5. Press
(Yes).
A confirmation screen appears.
6. Press
(OK).
302
(Select).
, select Contacts and press
(Select).
(Select).
.
(Select).
Tip
You can register a server if you press
(Options) after Step 3 and then
proceed from Step 6 of "Creating a
Server Profile" (page 300).
File Transfer & Synchronisation
Advertisement
Table of Contents
