Table of Contents
Advertisement
Using Bluetooth™ for Dial-up Connections
When Bluetooth™ is enabled, you can establish a dial-up connection.
1. Press
(Yes) when a confirmation screen appears after a connection request is
received from a Bluetooth™ compatible device in the vicinity.
2. Enter your PIN code (4 to 16 digits) and press
Using Infrared for Transferring Data
You can use infrared to exchange the Calendar data of your phone, Contacts list entries
of your phone, memory card or SIM card, pictures/videos taken or recorded with the
camera and My Items data that can be forwarded with an infrared compatible phone,
PC or other device. You can also restore or backup of My Items data. The
appears at the top of the display during transfer. To transfer data between your phone
and a PC, the supplied PC management software My Mobile needs to be installed on
the PC. The infrared function of your phone complies with IrMC 1.1. As shown in the
illustration on the right, bring your phone and an infrared compatible device to within 30
centimetres of each other and point both infrared ports directly towards each other. Do
not place an object between them. For details on the operating procedures of the other
device, refer to the instruction manual for that device.
292
(OK).
indicator
Note
• If a USB cable is connected to your
phone while you are using infrared,
the infrared communication ends.
• When infrared is used to send/
receive data, flight mode is set.
The
indicator appears at the
top of the display while flight mode
is set, except when a dial-up
connection was established. When
the sending of data is complete,
flight mode is cancelled.
File Transfer & Synchronisation
Advertisement
Table of Contents
