Supero H8DM3-2 User Manual page 62

H8DM3-2/H8DMi-2 User's Manual
Chipset Confi guration
NorthBridge Confi guration
Memory Confi guration
Bank Interleaving
Select Auto to automatically enable a bank-interleaving memory scheme when this
function is supported by the processor. The options are Auto and Disabled.
Channel Interleaving
Selects the channel-interleaving memory scheme when this function is supported
by the processor. The options are Disabled, Address Bits 6, Address Bits 12, XOR
of Address Bits [20:16, 6] and XOR of Address Bits [20:16, 9].
Enable Clock to All Dimms
Use this setting to enable unused clocks to all DIMMSs, even if some DIMM slots
are unpopulated. Options are Enabled and Disabled.
Mem Clk Tristate C3/ALTVID
Use this setting to Enable or Disable memory clock tristate during C3 and ALT
VID.
Memory Hole Remapping
When "Enabled", this feature enables hardware memory remapping around the
memory hole. Options are Enabled and Disabled.
CS Sparing
This setting will reserve a spare memory rank in each node when enabled. Options
are Enable and Disable.
DCT Unganged Mode
This setting enables unganged DRAM mode (64-bit). Options are Auto (ganged
mode) and Always (unganged mode).
Power Down Enable
This setting enables or disables DDR power down mode. Options are Enabled
and Disabled.
4-12