Zanussi ZI 422 Instruction Booklet page 5

Recess dimensions
Height 1780 mm
Depth 550 mm
Width 560 mm
For safety reasons, minimum ventilation must be as
shown in Fig. 2.
Attention: keep ventilation openings clear of obstruction.
50 mm
D567
A
D023
A
D265
together with the appliance on the stop strip (A).
Fig. 2
min.
cm 2 200
Fig. 3
Push appliance
into housing until
stop strip (A)
touches the
kitchen unit.
Fig. 4
If after having
carried out the
previously
described
operation there is
still some space
left between the
appliance and the
kitchen unit, fit
the trimming
provided
D
C
D369
included with the appliance. Snap vent grille (C)
and hinge cover (D) into position.
D098
B
D339
Fig. 5
Open the door and
push the
appliance against
the side of the
kitchen unit
opposite to that of
appliance hinges.
Fasten the
appliance with 4
screws provided
in the kit
Fig. 6
Press in the joint
covers between
the appliance and
the kitchen unit.
Fig. 7
Apply covers (B)
on joint cover lugs
and into hinge
holes.
45