Table of Contents
Advertisement
Safety Thermostat
To prevent dangerous overheating (through
incorrect use of the appliance or defective
components), the oven is fitted with a safety
thermostat, which interrupts the power supply. The
oven switches back on again automatically, when
the temperature drops.
Should the safety thermostat trigger due to incorrect
use of the appliance, it is enough to remedy the error
after the oven has cooled down; if on the other hand,
the thermostat triggers because of a defective
component, please contact Customer Service.
Before using the oven for the first time
Remove
all packaging,
outside the oven, before using the oven.
Before using for the first time, the oven should be
heated up without food.
During this time, an unpleasant odour may be
emitted. This is absolutely normal. It is caused by
manufacturing residues.
Ensure the room is well ventilated.
1. Switch the oven function control knob
to fan cooking
2. Set the thermostat control knob to 250°
C.
4. Open a window for ventilation.
5. Allow the oven to run empty for ap-
proximately 45 minutes.
This procedure should be repeated with the full
grill
function for approximately 5-10 minutes.
The cooling fan
The cooling fan is designed to cool the oven and
the control panel. The fan switches on automatically
after a few minutes of cooking. Warm air is blown
out through the aperture near the oven door
handle. When the oven is switched off, the fan will
remain on in order to cool the oven and kitchen
cabinets properly, after which it switches off
automatically.
both inside and
.
Then let the oven cool down. Then
dampen a soft cloth with warm water and
a little mild washing-up liquid and use this
to clean the oven cavity.
Before using for the first time, carefully
wash the oven accessories as well.
To open the oven door, always hold the
handle in the centre.
9
Hide quick links:
Advertisement
Table of Contents
