Ryobi CPL1800 Operator's Manual page 19

CLEANING THE CHIP DUST PORT AND
EMPTYING THE DUST BAG
See Figure 19.
After using the planer for an extended period of time or when
planing wet or green timber, chips may build up in the chip
dust port. Chip build-up restricts air flow and causes the
motor to overheat. Clean the chip dust port and empty the
dust bag regularly.
Remove the battery pack from the tool.
?
Remove the dust bag from the chip dust port.
?
Clean the build-up fr om the chip dust port with a small
?
piece of wood. Do not use your hands or fingers.
Unzip the dust bag.
?
Empty all debris from the dust bag and ensure that the
?
collar is free of debris.
Replace the dust bag.
?
MAINTENANCE
19
CHIP DUST PORT
DUST BAG
Fig. 19