Edger Blade Installation - Echo 99944200465 Operator's Manual

ASSEMBLY 99944200465

Edger Blade Installation

1. Remove bed redefining blade as shown in "Blade
Replacement" Section. Discard used split pin.
2. Do not remove inner blade adapter (A) or locking tool (B).
3. Install and center edger blade (C) on inner adapter .
A
4. Install outer adapter (D) and nut (E).
5. Tighten nut (E) firmly, counterclockwise.
B
6. Remove locking tool (B).
7. Install new split pin (F) to secure nut (E).
F
C
E
D
X7702096503
12
© 08/2013 ECHO Inc.