Table of Contents
Advertisement
W
A
S
LEVELLING THE APPLIANCE
Having completed the electrical connections, move your appliance to its operating position. To minimise
vibration and noise during spinning your appliance must be level and in firm contact with a well supported
or preferably solid floor. Failure to level the appliance could lead to instability and consequent damage to
adjacent equipment.
Suspended, wooden floors or plinths might be needed to distribute the weight evenly.
Fig 6
Fig 7
Fig 8
6
H
I
N
G
1 One or both of the front feet should be adjusted in order to level the
appliance. The back feet also need to be secured by adjusting the nuts.
(Fig 6).
2 Screw the foot up or down until the appliance is level in both front to rear
and side to side directions. Turn feet clockwise to lower the appliance
(Fig 7).
3 Lock the feet by screwing up the nuts using a 16mm spanner so that they
are in firm contact with the underside of the machine (Fig 8).
M
A
C
H
I
N
E
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WASHING MACHINE and is the answer not in the manual?
Questions and answers