Connectivity; Bluetooth - Sharp 703SH User Manual

Connectivity

(M 10)
By configuring the settings in this menu, you can connect to Bluetooth
wireless technology or Infrared enabled phones via these
connections, as well as a PC via Bluetooth wireless technology or
Infrared connections.

Bluetooth

(M 10-1)
For using the Bluetooth wireless function, you need to search for
other Bluetooth wireless technology enabled devices to establish
contact with your phone. Keep your phone within a distance of 10
metres from the devices before searching.
Using the Bluetooth Wireless Function
(M 10-1-1)
To Turn On or Off
→
"Connectivity" "Bluetooth"
1.
Select "On" or "Off".
The Bluetooth wireless setting is activated, "On" is selected and
" " is displayed.
To Show or Hide Your Phone
→
"Connectivity" "Bluetooth"
1.
Select the desired visibility settings.
"Show My Phone":
"Hide My Phone":
→
"Switch On/Off"
(M 10-1-2)
→
"Visibility"
Allows other devices to recognise your
phone.
Hides your phone from other devices.
To Search for Devices to be Paired
A maximum of 16 devices can be searched for.
→
"Connectivity" "Bluetooth"
1.
Select the desired device for pairing.
2.
Enter the device passcode.
Note
• If the Bluetooth wireless function is off before searching, the phone
turns the Bluetooth wireless function on automatically and starts
searching.
• You can only select one device for pairing. To change the paired
device, see "To Activate the Paired Device" on page 102.
Tip
• You can save battery power by turning the Bluetooth wireless
function off while it is not in use. Turn the Bluetooth wireless
function off in "To Turn On or Off" or in "To Turn Off Automatically"
on page 103.
• During a call, you can divert voice calls to the paired handsfree
device. Press [Options], select "Transfer Audio" and then "To
Bluetooth" or "To Handset". If you wish to disconnect the paired
device, select "Off".
(M 10-1-3)
→
"Search for Devices"
Connectivity 101