Sharp 703SH User Manual page 96

Withheld Call
When the "Withheld Call" is set, incoming calls without a CLI (Calling
Line Identification) are rejected.
→
"Settings" "Call Settings"
"Withheld Call"
1.
Select "On" or "Off".
Changing the Network Password
→
"Settings" "Call Settings"
N/W Password"
1.
Enter the old network password.
2.
Enter a new network password.
3.
Enter the new network password again.
If you enter the incorrect password, you are asked to enter the
password again.
4.
Press .
Fixed Dialling Number
When the Fixed Dialling Number is enabled, you can only call
pre-registered numbers.
To Enable Fixed Dialling Number
→
"Settings" "Call Settings"
→
Dialling Number" "Switch On/Off"
1.
Select "On" to enable this function.
→ →
"Restrict Calls"
→ →
"Restrict Calls" "Change
→ →
"Restrict Calls" "Fixed
To Add a New Name
→
"Settings" "Call Settings"
→
Dialling Number" "Edit Dial List"
1.
Highlight the blank entry, press [Options], then select "Add
New Dial".
2.
Enter your PIN2 code.
3.
Add a name and a phone number.
For details on adding a name and a phone number, see "Add New
Contact" on page 31.
4.
Press [Save].
Minute Minder (M 12-6-5)
Minute Minder function informs you of your talk time by sounding a
tone after every minute.
→
"Settings" "Call Settings"
1.
Select "On" or "Off".
Displaying Call Time Counter
→
"Settings" "Call Settings"
1.
Select "On" or "Off".
→ →
"Restrict Calls" "Fixed
→
"Minute Minder"
(M 12-6-6)
→
"Call Time Counter"
Settings 95