Installation; Statutory Requirements; Preparing To Install - Siemens EC645HB90A User Instructions

Installation

Statutory
requirements

Preparing to install

Fig. 1
This installation must conform with the following:
Manufacturer's Installation instructions
Ø
Local Gas Fitting Regulations
Ø
Municipal Building Codes,
Ø
Refer to AS/NZS 5601.1 for Gas Installations.
Ø
S.A.A. Wiring Code
Ø
Local Electrical Regulations
Ø
Any other statutory regulations
Ø
Refer to AS/NZS 5601.1 for piping size details. These
built-in cooktops are intended to be inserted in a
benchtop cutout.
Only an officially authorised technician should connect
the appliance.
Before you begin, turn off the gas and electricity supply.
Installation dimensions are shown in Fig.1/1a.
7